Materials: MOLGER mirror + JANSJÖ work lamp
Description: I wanted an alternative and complement to the ceiling lights in my bathroom and powder room. Seeing how the JANSJÖ LED work lamp is assembled (the stem has 2 screws at its end to connect it to the heavy, metal base), and having installed MOLGER mirrors that have a wide, protruding wood frame, I figured I could combine the two products to create very cost-effective, functional (flexible) lighting at the sinks.
Power outlets within range are required and I recommend careful drilling of the holes into the wood. The original base of the JANSJÖ lamp can be used to mark where to drill. I preferred using the screws provided with the lamp, so I ended up drilling with two bits: the smaller one all the way through to accommodate the screws, the larger one just enough to allow the screw heads to be recessed and to reach.
(As I hinted, don't let the larger bit drill all the way through--it almost happened to me!) It is particular convenient that just enough space can be found behind the MOLGER mirrors to tuck away unneeded electrical wire length. I used 2 JANSJÖ lamps for the 100 cm MOLGER mirror and 1 lamp for the 60 cm mirror.
~ Jerome Do, Montreal, Quebec, Canada
Post A Comment:
0 comments:
Post a Comment